Home
About Us Where To Buy
Phone:
TOWER ERECTION WINCH

The TEW25H-01 winch has been designed to comply with all the relevant safety requirements for lifting loads. Two fully automatic, fail safe braking systems are incorporated into the unit. The first is situated directly in the transmission line and functions every time the winch controls are operated. The second is mounted in direct contact with the rope drum and is controlled by sensing system acting on the main drive chain and the hydraulic oil pressure. In the unlikely event that the chain should fail, or all hydraulic pressure lost, then this second brake would automatically apply and hold the load.

All components used in the manufacture of this winch are designed to offer a 5:1 safety factor based on the safe working load of this winch.

Never use this tool to cut electrically energised cable. Severe or fatal injury may result.

Quantity:
PRODUCT DETAILS
Features Ordering Information Video Tutorials
Maximum Load bottom of drum: 2500kg
Rope Speed: Speed Bare Drum:5.2m/min Speed Full Drum:12.2m/min
Rope Capacity: 500m x 13mm dia steel 450m x 14mm dia steel 340m x 16mm dia steel 220m x 19mm dia steel
Engine: Air-cooled diesel. Max 13hp at 3000rpm
Controls: Single dead-man control for raise/lower. Separate lever for fine speed adjustment.
Transmission: Variable output pump, positive displacement motor, chain drive to sliding pinion for free drum facility, final drive via ring gear on rope drum.
Safety: Primary brakes, spring applied, pressure released. Secondary brakes – disc brake type. Fold down spade anchor. Front and Rear props. Shackle points on frame
Length: 3015mm
Width: 1410mm
Height: 2100mm
Weight: 1350kg without rope
**Note: Winch supplied fitted with towing socket for use with 50mm ball as standard. Other systems available on request.
SIMILAR PRODUCTS

Single Capstan Winch

The C-1210 Single Capstan Winch has been designed to provide a light and powerful universal winch.
ID
C-1210

Hydraulic Universal Winch

The CBS 821 Universal Winch offers the constant pulling tension of a double capstan drive and the flexibility of a direct drive drum in one machine.
ID
C-1250-08

High Leverage Diagonal Cutter With Tether Ring

The high-leverage design means the rivet is closer to the cutting edge - for better gripping power than other plier designs. Includes split ring for tethering plier while working at height.
ID
K-D2288TT

CBS Products was established in 1971 in Oakham, Rutland, England. Since entering the field of telecommunications, the company has continued to be an important cornerstone in the industry, with large companies including BT making use of its services and expertise.

ADDRESS
CBS Products (KT),
Pillings Road
Oakham
Rutland
LE15 6QF
UK
EMAIL
PHONE