Email: sales@cbsproducts.com
Phone: +44 (0) 1572 723 665
HARD CABLE RATCHET CUTTER 41MM
This rugged cutter is designed to cut the following:
ACSR power cable up to and including 556 kcmil
500 kcmil hard drawn electrical conductors 35,6mm maximum outside diameter
750 kcmil soft drawn electrical conductors 40,6mm maximum outside diameter
Self-support (figure 8) telecommunications cable 44,2mm with a maximum support messenger size of 7mm
Overall length 457mm
Note: Do not exceed these maximum cutting capacities for this tool or tool damage will occur.
Never use this tool to cut electrically energised cable. Severe or fatal injury may result.
Quantity:
PRODUCT DETAILS
When cutting with this tool, observe the following important directions:
The cable must enter into the jaws of the tool exactly perpendicular (90 degrees) to the cutting blades so as to result in a circular cross-section cut.
When cutting self-support cable, always orient the supporting strand so it faces the handles for maximum leverage.
If you encounter excessive cutting resistance, use a one click cutting cycle until the cutter moves freely.
Tighten the fulcrum nut periodically and keep the handle bolts tight. The tool will not operate properly unless the fulcrum nut is at least 15 ft-lbs. (20 Newton meters).
Blades made from 6150 alloy steel
